JEL-Leading Manufacturer of Clean Robot

Error Messages

3. Other errors

3.1 “Choose Date”
Cause:

(1) Although the Send/Receive data is not selected at the transceive dialog, [Send], [Receive], [Overwrite] or [Compare] operation is proceeded.
(2)Although the data to save is not selected at the Select File dialog, the [Decide] button is clicked.

Solution:

(1) After selecting the Send/Receive data, restart operation.
(Refer to “8.4 Transceive" the JELDATA3 Operation Manual.)
(2) After selecting the data to save, restart operation.
(Refer to “6.2 Save" of Standard Data Copy Manual.)

3.2 “Close the Working Folder.”
Cause:

The working folder is already opened by Explorer or another application.

Solution:

Check the path in the message, end Explorer or another application that is using the file, and restart JELDATA3.

3.3 “No Data in I Data.”
Cause:

Although there is no data (command string characters) in “I” Data on JELDATA3, the [Compare] of “I Data” was executed.

Solution:

Receive“I Data” File from the controller or write data (command string characters) directly.

3.4 “Set I Data within 255 characters.”
Cause:

“I Data”contains more than 256 characters (command string characters) at [Send].

Solution:

The number of characters for the send data of compound command must be no more than 255 characters including the carriage return.
JELDATA3 automatically adds the carriage return at the end of the data (command string characters) when sending “I Data”.
Thus edit the data (command string characters) so that the data contains no more than 255 characters.
(Refer to the JELDATA3 Operation Manual)




[an error occurred while processing this directive]