JEL-Leading Manufacturer of Clean Robot

Communication Software

Q: In the Controller Setup (L) window of JELDATA3, a setting specified in the Control Specifications or Instruction Manual cannot be selected.

A:

Please find the attached CD upon delivery and check whether the file of either “JDDEFSTD.xxxx” or “JDDEFCST.xxxx” is contained in it. ("xxxx" is a setting name)

1. In case the file “JDDEFSTD.xxxx” is contained
Copy the file to a folder where the software JELDATA3 is installed.
(Standard C: \Program Files\JELDATA3)
In the Controller Setup (L) window of JELDATA3, the setting name ("xxxx" of the file name) will be displayed in the pull-down list for the Standard button.
2. In case the file “JDDEFCST.xxxx” is contained
Copy the file to a folder where the software JELDATA3 is installed.
(Standard C: \Program Files\JELDATA3)
In the Controller Setup (L) window of JELDATA3, the setting name ("xxxx" of the file name) will be displayed in the pull-down list for the Custom button.
3. In case neither file is found
If you cannot find the attached CD upon delivery, please find the Serial No. labeled or incised mainly on the lower left of the front of the controller and contact us . We will email you the target file.
Copy the target file to a folder where the software JELDATA3 is installed.
(Standard C: \Program Files\JELDATA3)

 Click to see JELDATA3 Operation Manual.